| MODEL NO. | ALSD300C1S1M2 |
|---|
| PRODUCT NAME |
Top Valve Controller |
| Enclosure |
Die-casting aluminum: O-ring sealed |
| Coating |
Dichromate conversion with polyester powder coating |
| O-rings |
Buna N |
| Environment |
Type 4, 4X, IP67 |
| Area Classification |
Standard |
| Fasteners |
Stainless steel |
| Shaft |
Stainless steel Namur |
| Conduit Entries |
Two ½” NPT |
| |
Also available with two ½” BSPP, M20-1.5 |
| Pilot Coil Standard |
C1: 15mm FIM pilot, Orifice 1.1mm, 12,24VDC(﹤2.3W), 110,220VAC(2.8VA) |
| Pilot Coil Optional |
C1: 15mm Crouzet pilot, Orifice 0.5mm, 24VDC(﹤1W), Ex ia II C T6 |
| Pilot Coil Optional |
C2: 10mm pilot, Orifice 0.7mm, 6,12,24VDC(﹤1.3W) |
| Spool Valve |
S1: 5/2 Aluminum spool valve, Anodized coated in black |
| |
Single pilot actuated, With manual operator Cv=1.4 |
| |
3/2 available with plug |
| Sensor Standard |
M2: 2 SPDT CROUZET, mechanical switches, 15A125-250 VAC |
| Sensor Optional |
ML2: Low Temp.-40℃ 2 SPDT CROUZET, 15A125-250VAC |
| Sensor Optional |
MG2: Gold contacts 2 SPDT CROUZET, 15A125-250VAC |
| Sensor Optional |
M3: 3 SPDT CROUZET , 15A125-250VAC |
| Sensor Optional |
M4: 4 SPDT CROUZET, 15A125-250VAC |
| Sensor Optional |
M5: 2 DPDT CROUZET, 15A125-250VAC |
| Sensor Optional |
PP22: 2-p+f NCB2-V3-No inductive sensors NAMUR (2 wire), 8DCV, |
| Sensor Optional |
PA22/3: 2-ALPS Inductive sensors (2/3 wire), 10-30 VDC, |
| Sensor Optional |
QA23: 2-ALMS Magnet sensors (3 wire), 5-240 VAC/DC, |
| Terminal Strip Contacts |
8～14 |
| Mounting Bracket |
MB – 3.3: 30 x 80, 130 H:20, 30 (Carbon steel) |
| Working Pressure |
1.5～8 bar |
| Working Medium |
less than 40µm filtered and dried air |
| Temperature Rating |
-20℃-85℃ |
